Description 2 in 1- CLEANER & ETCH SOLUTION To prepare all galvanised iron surfaces eg: Fencers, Garage Doors and Roofing. Application May be applied by mop-swab or brush. Surfaces should be hosed or washed with clean water to remove heavy dust and grit deposits. Galv Prep must be worked well over the surface. Once cleaning is complete, the surface should be thoroughly washed with water to remove residues left by the Galv Prep. Galvanised steel surfaces must be checked that they are in fact water-break free after cleaning. The treatment must be repeated on areas which may have been missed during the initial cleaning operation after conducting a Water-break test. Technical Data Requirements : A wet reaction period of 10 – 15 minutes before rinsing clean. Coverage : Approximately 20 – 30m² / litre (depending on the surface) Pack size : 250ml, 500ml, 1lt, 5lt PRECAUTIONS and CLEANING Heavy duty galvanizing is more difficult to clean than lightweight galvanizing. Clean all equipment immediately with water. Rubber gloves are recommended to protect hands. Not suitable for ferrous surfaces.
